Big Johnson Construction ( www.bjcsteel.com) started erecting this 40,000 SF B&C Steel pre-engineered metal building on September 1. In less than three weeks, it was ‘topped-out’. This community recreation center is engineered around four ‘cluster’ buildings, which includes the main multi-purpose gymnasium that is 113’ x 258’. In collaboration with the architect, no detail went unnoticed. The exterior will have several exposed/tapered columns, roof overhangs and parapet walls, an array of windows and doors, four different wall panel profiles/colors, along with B&C’s 18” standing seam roof system. B&C Steel is honored to be part of this crown jewel of Fort Morgan. Stay tuned for more photos!
Steel is in the air at the Kennon Manufacturing (www.kennonproducts.com) campus in Sheridan, WY. As a producer of quality sun shields for the aviation industry, Kennon has extended its roots in the Wyoming community by investing in a new, 30,000 SF, state-of-the-art facility. Sletten Construction (www.slettencompanies.com) awarded this pre-engineered metal building to B&C Steel in the spring of 2020, due to its competitive price and industry-leading customer service. Kennon Manufacturing is not the typical ‘box-building’. Arete Design Group (www.aretedesign.group) planned this project around eight ‘single-slope’ roof transitions, which consist of large overhangs/soffits. Included in the design is another 6,000 SF of mezzanine space, which is being provided by B&C Steel. The roof system will be comprised of B&C’s 18” standing seam, while the wall panels will be a blend of 7/8” corrugated ‘COR-TEN’, B&C’s 12” flush panel, along with Metal Sales’ PBU and IC72 panels.
Caspar Building Systems (www.casparbuildingsystems.com) selected B&C Steel as the manufacturer for the new Converse County Road & Bridge maintenance facility in Douglas, WY. The project has 25,000 SF of service bays, which includes dual runways for a 10-ton crane system. An additional 6,500 SF of metal building was fabricated for the county’s offices, training/conference room, and locker rooms. The building order includes the entry vestibules, B&C’s 18” standing seam roof panel, B&C’s ‘R’ wall panel, full-height liner panel, and partition walls.
Polar Service Centers is the nation’s largest network of commercial parts and repair facilities dedicated to the tank trailer and tank truck industry (www.polarservicecenters.com). When PSC looked to expand into the Rocky Mountain region, they chose Can Do Construction to develop their 23,000 SF campus in Casper, WY. As Can Do’s metal building supplier, B&C Steel provided a streamlined approach for cost-estimating, engineering, and steel fabrication. This metal building has a 5-ton bridge crane to service tank trailers, along with an intricate series of roof I-beams that are part of the ‘fall-protection safety’ that workers latch their harnesses to while servicing equipment. B&C Steel also supplied the bar joists and decking for 1,500 SF of the mezzanine, as well as the walk doors, and B&C’s ‘R’ panel roof and wall sheeting.
Kindvall Siding and Construction of Scottsbluff can be seen here installing a standing seam insulated metal panel. The existing roof is about 22,000 square feet. We used an insulated metal panel as they’re known for their superior thermal properties. Half of this roof covers a pool, and with a pool comes moisture and condensation issues. With an insulated metal panel, we get a weather-tight roof that provides a strong thermal and moisture barrier.
Construction has started on the 38,000 SF pre-engineered metal building for Johnson Moving & Storage in Fort Collins, CO. This building is 175’ x 218’ with a 36’ eave height. It was designed to be a climate-controlled ‘POD’-storage facility. An additional 2,400 SF of covered loading dock and 2,500 SF of interior mezzanine was incorporated into this steel package. The exterior will consist of a 24-gauge standing seam roof and 26-gauge wall panel that is being manufactured by B&C Steel. This building was purchased and is being erected, by CH Yarber Construction.
At the time of this media footage, the steel erection was only two days in progress. A pre-engineered metal building system by B&C Steel will save you countless hours of time and management due to our extensive quality control process, which includes shop welded clips, bolted connections, proper piece-mark identification, a skilled and detail-oriented engineering department, along with an industry-leading pre- and post-sale customer service team. Call B&C Steel to discuss your next pre-engineered metal building project!